 |
Engineering repair composites |
|
|
|
|
|
building repair and protection |
|
|
|
|
|
|
|
|
Industrial maintenance |
|
|
|
|
|
|
|
Firesafe Insulation |
|
|
|
|
|
|
| High Compression Gasketing and Packing |
|
KLOZEAL PACKING
A complete line of high performance, high compression packing designed to seal and protect any type of surface and machinery.
Types of Soft Packing Construction:
|
Braid-Over-Braid
Formed by one or more covers of braided yarns over a core of braided, twisted or homogeneous materials into round construction. May be calendered square or rectangular into a dense, highly lubricated packing for low speed and high pressure applications. |
 |
Cross Braid
Strands of yarn cross the surface diagonally, interlocking to form a dense, yet flexible structure, that cannot unravel in service. Lubrication of individual strands in the braiding process provides a more uniform distribution of anti-friction materials and yarn density for increased life of packing. |
 |
Twisted
Strands of yarn are twisted in the same running direction to the required round size. Only recommended for low speed, low pressure utility use where packing space is small or where available cross-section is larger than required packing space.
The individual strands are easily removed to fit emergency requirements |
 |
Square Braid
Strands of yarn cross over and under other strands in the same running direction, and produce square cross sections. Other names for this construction are Square, Plaited or Flax Braid. Normally specified for high speed rotary service at low pressure. |
 |
Plastic
Lubricated plastic packings contain oil, fiber materials, graphite, grease, or mica. The usual form is square within a cotton jacket for handling, asbestos jacket for retention in the stuffing box. The normal application is sealing gases or where packing must supply part of or all required lubrication. |
 |
Metallic
Metal packings of lead, copper, aluminum foil or ribbon is spirally wrapped, folded or twisted into square or rectangular cross-section. Normal use is high pressure, high temperature service and corrosive fluids. |
 |
Laminated
Coils, Spirals or Rings are cut from molded slabs of fabric and rubber materials. This construction is normally used for the liquid end of reciprocating rams or pump pistons. |
 |
Wrapped
Constructed from rubber impregnated fabric materials rolled or calendered into square or rectangular cross-section, or over homogeneous core for high resiliance. Typical use is in applications with high lateral movement in the equipment. |
 |
|
|
| KLOZEALS STYLE NO. 2000 |
“KEVLAR” ARAMID FIBER PACKING (NON-ASBESTOS)
Braid over braid (Soft) aramid fiber packing impregnated with TFE and high temperature lubricant.
APPLICATION:
For use in power plant, chemical plant, petroleum, pulp and paper mills, steel industry and textile industry.
SERVICE TEMPERATURE:
260°C (500 °F)
PH - 3 - 11
Pressure Range 15 kg/Sq. cm max |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 2100 |
CARBON FILAMENT PACKING
Interlocked of carbon filament yarn with impregnation of special lubricant.
APPLICATION:
Rotary and reciprocating applications.
SERVICE TEMPERATURE:
260 °C (500 °F)
PH - 1 - 14 |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 2200 |
PURE GRAPHITE FILAMENT PACKING
Cross-braided from pure graphite filament yarn. Design for high thermal conductivity and low friction.
APPLICATION:
For high speed shafts over 4,000 rpm steam. Service in chemical, petrochemical refineries and power generation application.
SERVICE TEMPERATURE:
650 °C (1200 °F)
SERVICE PRESSURE:
50 kg/Sq. cm (7200 PSI) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 463/464 |
PURE TEFLON PACKING
Regular braided KLOZEALS 463 (dry) and cross braided 464 (not w/oil) made from pure TFE fiber.
APPLICATION:
For high speed rotary shafts, valve stem, reciprocating rods, mixers and agitators.
SERVICE TEMPERATURE:
260 °C (500 °F)
SERVICE PRESSURE:
50 kg/Sq. cm (700 PSI)
PH - 0 - 14 |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 554 |
STEM VALVE PACKING
Asbestos core surrounded by inconnel wire inserted high grade asbestos yarn graphited for corrosion resistance.
APPLICATION:
For turbines, valves, expansion joints automatic tube blowers.
SERVICE TEMPERATURE:
649 °C (1200 °F)
SERVICE PRESSURE:
350 kg/Sq. cm |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 482 |
FLEX PACKING WITH TEFLON
It is made of long fiber flax impregnated with TFE.
APPLICATION:
Specially recommended for stern tube and rudder post. Also for cold water application.
SERVICE TEMPERATURE:
105 °C (220 °F)
SERVICE PRESSURE:
50 kg/Sq. cm (700 PSI) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 481 |
FLAX PACKING WITH TEFLON
It is made of long fiber flax impregnated with TFE.
APPLICATION:
Specially recommended for stern tube and rudder post. Also for cold water application.
SERVICE TEMPERATURE:
105 °C (220 °F)
SERVICE PRESSURE:
50 kg/Sq. cm (700 PSI) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 865 |
TEFLON IMPREGNATED PACKING
Regular braided asbestos packing made from long fiber white asbestos impregnated with TFE.
APPLICATION:
For rotating shafts, rod, valves against water, steam and wild acids.
SERVICE TEMPERATURE:
260 °C (500 °F)
PH - 4 - 10
SERVICE PRESSURE:
50 kg/Sq. cm (700 PSI) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 481 |
FLAX PACKING WITH TEFLON
It is made of long fiber flax impregnated with TFE.
APPLICATION:
Specially recommended for stern tube and rudder post. Also for cold water application.
SERVICE TEMPERATURE:
105 °C (220 °F)
SERVICE PRESSURE:
50 kg/Sq. cm (700 PSI) |
|
|
|
|
|
|
| KLOZEALS STYLE NO. TX23001 |
HEAVY GRAPHITED ASBESTOS PACKING
Packing made from white asbestos yarn with lubricant and graphite. (Graphited every strands of yarn/Regular Braid)
APPLICATION:
For centrifugal pumps handling, alcohol, mild acids and alkalies.
SERVICE TEMPERATURE:
260 °C (500 °F)
SERVICE PRESSURE:
50 kg/Sq. cm |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. TX14/516/38/1201 |
| INTERLOCK CARBON YARN PACKING WITH CONCENTRATED PTFE |
|
|
|
|
KLOZEAL GASKETS
Extensive inventory and high performance gasketing materials for all type of compression sealing materials.
|
|
|
| KLOZEALS STYLE NO. 890 |
GENERAL JOINT SHEET
Made of white asbestos and heat resisting rubber compound.
It ensures maximum stability against high pressure and temperature.
BINDER:
Buna-S
SERVICE TEMPERATURE:
450 °C
TEMP. & PRESSURE LIMIT:
Steam
260 °C
30kgf/sq. cm.
Water
100 °C
30 kgf/sq. cm. |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 893 |
UNIVERSAL JOINT SHEET
Made of high grade asbestos fiber jointing bonded with a sophisticated compound. This is recommended on hot oils and petrochemical plants, solvents and refrigerants.
BINDER:
Synthetic rubber
SERVICE TEMPERATURE:
500 °C
TEMP. & PRESSURE LIMIT:
Steam
300 °C
30 kgf/cm2
Water, Alkalis
100 °C
50 kgf/cm2
Salt solutions
Oil & Oil gases
260 °C
25 kgf/sq. cm |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. TX1855/1855-4480 |
ACID & OIL RESISTING JOINT SHEET
Made of blue asbestos fiber jointing, bonded under pressure and vulcanized into a homogeneous sheet. Recommended for hot and cold mineral acids.
BINDER:
Buna-N
SERVICE TEMPERATURE:
500 °C
TEMP. & PRESSURE LIMIT:
Steam
300 °C
40 kgf/cm2
Water, Alkalis
100 °C
60 kgf/cm2
Salt solutions
300 ° C
30 kgf/cm2
Oil & Oil gases
Organic solvents
200 °C
25 kgf/sq. cm |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 899 - W |
COMPD. ASB. W/WIRE
A compressed asbestos fiber jointing embedded with a strong reinforcement of steel wire gauge. Superior in performance over other form of jointing sheets where severe physical condition of high pressure and temperature. Supplied with graphite and non-graphite.
BINDER:
Buna-N
SERVICE TEMPERATURE:
600 °C (1048 °F)
SERVICE PRESSURE:
300 kg/sq. cm |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 895 |
ASBESTOS CLOTH (PLAIN)
Woven from white asbestos yarn. Recommended for use against steam, gases and gaseous solution.
SERVICE TEMPERATURE:
315 °C (599 °F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 895 - RW |
ASBESTOS CLOTH RUBBERIZED WITH WIRE REINFORCED
Woven from white asbestos yarn reinforced with wire and bonded with high temperature-resistant rubber compound. Recommended for use against steam, gases at high temperature.
SERVICE TEMPERATURE:
482 °C (899.6°F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 896 |
ASBESTOS GASKET TAPE
Made from the same materials as wire inserted asbestos cloth coated with resisting rubber compound and asbestos cloth plain.
SERVICE TEMPERATURE:
315 °C (599 °F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 1600 - B |
ASBESTOS ROPE BRAIDED
Made from durable braided materials for blow off pipes and general gasketing.
Also available:
Asbestos Rope twisted |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 1600 - T |
ASBESTOS ROPE TWISTED
Made from durable twisted materials for blow off pipes and general gasketing application to 540°C (1000°F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 101 |
Is a total combining specially developed liquid gasket for guaranteed protection against leakage. The system of this liquid gasket is independently and self leveling, without the need of sheets gasket. In addition, realize a large labor and reduction cost.
SERVICE TEMPERATURE:
40°C up to 150°C
CONTENT:
85 grams/tube |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 898 |
| Same as Klozeals No. 101, but different service temperature (110 °C to 260 °C) and color, viscosity. |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 622 |
RED RUBBER GASKET
Compounded rubber sheet particularly suitable for hot or cold water, ammonia, mild caustic soda, low pressure or saturated steam.
SERVICE TEMPERATURE:
120 °C (250 °F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 622 - W |
RED RUBBER GASKET WITH REINFORCEMENT
Compounded rubber sheet with wire suitable where ordinary rubber may creep.
SERVICE TEMPERATURE:
120 °C (250 °F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 671 |
NEOPRENE RUBBER SHEET WITH CLOTH INSERTION
Made of black rubber with cloth insertion sheet to give high strength. Recommended for hot and cold water, low pressure steam or ammonia.
SERVICE TEMPERATURE
180 °C (356 °F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 623 |
SILICONE RUBBER GASKET
Excellent resistance to the effect of aging and ozone, and they generally have outstanding compression set properties and good resistance to "EP" lubricants and phospateester based fluids. Low aniline point of petroleum oils cause excessive swell. Abrasion resistance of silicone is poor. It can be used at temperature from 100 °F to 600 °F (316 °C). |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. TX316/14 |
Neoprene Rubber Gasket White with single ply Nylon insertion
Temperature:
-100°C to 100°C |
|
|
|
|
|
|
| KLOZEALS STYLE NO. TX48410 |
Food Grade Neoprene Gasket
Temperature:
100°C
; 200°C (max)
Pressure:
1000psi |
|
|
|
|
|
|
| KLOZEALS STYLE NO. TX4480/3510 |
High performance gasket reinforced with graphite to provide optimum compression and heat resistance.
Temperature:
200°C
; 450°C (max)
Pressure:
2000psi |
|
|
|
|
|
|
| KLOZEALS STYLE NO. TX0029 |
High performance Acid resistant Non-asbestos Gasket Joint sheet and reinforced composite sealing material.
Temperature:
100°C
: 350°C (max)
Pressure:
1000psi |
|
|
|
|
|
|
| KLOZEALS STYLE NO. TX1939 |
High Pressure Spiral metal would gasket with S/S inconel wire insertion.
Pressure:
1,500psi
Temperature:
350°C |
|
|
|
|
|
|
| KLOZEALS STYLE NO. 671 |
NEOPRENE RUBBER SHEET
Made of oil resistant materials and carbon black compound for use against oil or solvent, non-aromatic petroleum products, water and low pressure steam.
SERVICE TEMPERATURE:
150 °C (300 °F) |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 680 |
CLOSE INSERTED RUBBER DIAPHRAGM SHEET
Compounded rubber diaphragm sheet for hydraulic service. |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 671 - NY |
NEOPRENE RUBBER SHEET WITH NYLON INSERTION
Made from premium grade synthetic neoprene rubber with nylon insertion. Recommended for gas, oils, gasoline and refrigerants at high pressure. |
 |
|
|
|
|
|
| KLOZEALS STYLE NO. 671 - WI |
NEOPRENE RUBBER SHEET WITH WIRE INSERTION
Made from premium grade synthetic neoprene rubber with wire insertion. |
 |
|
|
|
|
